Bye Bye Standby® Motion Sensor Order code: BBSBMSW
Motion Sensor Control your appliances through motion detection.
This PIR (Passive Infrared) Motion sensor can be used in conjunction with the Bye Bye Standby® Smart Sockets to give appliance control through motion detection.
Features • Adjustable detection range up to 10m. • Can send commands through walls and ceilings up to 25m. • Adjustable time frames • 256 possible codes (A-P and 1-16)		Important For indoor use only. Keep away from all sources of water or moisture. Adult installation only. Troubleshooting If the unit does not work…. • Check the batteries are installed correctly • Ensure you are using the units within the operable range. • Check the House and Unit Codes are compatible on the transmitter and receiver. • Check the setting on the TIME is as required. • Adjust the angle until the required detection area is reached. • If the AUTOMATIC setting is being used and the system starts to early this can be adjusted.
House Codes A-P	Unit Codes 1-16
Specifications • Transmitter range: up to 25m • Detection range: up to 10m • Angle of detection: 110° • Detection battery life: standby minimum 12 months • Battery type: 3 x AAA alkaline battery 1.5V • Time-on adjustment: 4 seconds to 5 minutes