Bye Bye Standby Wall Switch Pro

Order code: BBSWSP

• Simple stick on operation - no wiring required
• Soak tested to ensure longer operational life
• Range tested to ensure good range in a corporate environment
• Full compatability with the Energy Manager, Smart Socket Pro and Energy Manager Zone Controller
• Simply sticks onto walls cubicles with either double sided tape (for walls or trunking installation) or velcro (for sound partition / cubicle walls) - no drilling or electrical connections required
• Provides simple local override system for the Energy Manager
• 24 month manufacture warranty

The Bye Bye Standby Pro Wall Switch is suitable for use to within a corporate environment to switch a Bye Bye Standby Smart Socket Pro on or off, either as part of a manual system or as an override to the Energy Manager automated system.

As part of a manual system the switch can be located next to a workstation or group of workstations to allow staff to switch on their workstation equipment first thing in the morning and switch it off again in the evening.

As part of the Energy Manager automated system, the Wall Switch Pro can be fitted next to or within a cubicle or workstation to allow local override of the Energy Manager system - for example to turn a workstation on at the weekend if staff need to work unexpectedly.

The Wall Switch Pro has the code selection system concealed behind the operating front plate of the switch to prvent accidental changes or operation. This eliminates one user accidentally switching off another staff member's workstation accidentaly.

Specifications

Physical

• Weight: 90g (including battery)
• Dimensions (width, height, depth) : 79.4 x 79.4 x 16.5 mm
• Energy use: 0w (Standby and operational)
• Storage: -15 degrees C to 50 degrees C
• Operation: 3 degrees C to 40 degrees C
• IP rating: None, designed of general office use
• Attachment: Can be fitted to smooth surface (for example trunking or a smooth wall) with the supplied double sided tape, can be fitted to a suitable velcro compatible surface such as partition dividers by souble sided velcro tape (not supplied) or can be screwed to a 1 gang electrical socket

Hardware

• Frequency: 433MHz
• Range: up to 30m in free air. The unit can operate through walls but with reduced range depending on wall construction.
• Proocol: Bye Bye Standby Open Protocol 1
• Battery required: 12v (supplied)
• Battery life: Normally approx. 2 years, more with less frequent operation
• Indicators: Discreet LED mounted inside unit indicates transmission of radio messages
• Codes: Can transmit up to 64 different codes

Servicing

• Recommended testing of battery every 6 - 12 months

Approvals

• Approvals: CE approved